Transfusion system for infusion solutions, 1 pc
€3.12 €2.84
- The puncture needles (metal and plastic) are made with “pencil point” technology to reduce the risk of plug fragmentation and the possibility of needle impairment.
- The air intake needle (or air intake valve of the system tank) is equipped with a waterproof membrane for air purification. The membrane is fiberglass and has an air purification percentage of 95% (standard is at least 90%) reducing the risk of sterility of the injected solution.
- the sterile infusion system is equipped with a nylon liquid micro-filter with a minimum possible diameter of 15 microns, allowing reliable purification of the solution from impurities without reducing the flow rate of the solution and preventing violation of the microcirculation in the capillaries of the lungs by ingress of particles of glass, rubber, etc.) (flow rate 1520ml/10min with standard 1000ml/10min).
- the infusion system for infusion solutions is complete with Luer and Luer-Lock connections, adapted for injection needles, peripheral and central venous catheters.
- the roller regulator changes infusion rate smoothly: 20 drops = 1 ml.
- Transparent connecting tubes allow you to check the quality and condition of the injected solution
- Latex or non-latex injection site allows for bolus injections.
- The 21G injection needle (0.8 x 40 mm) with atraumatic sharpening ensures painless venipuncture.
Special instructions
Do not use if the integrity of the packaging is damaged.
Storage conditions
Store at temperatures from +5 to +25C and humidity up to 80%.
Functional features
needles for piercing corks (metal and plastic) are made using pencil-point technology, which reduces the risk of cork fragmentation and the likelihood of needle obstruction.
The air intake needle (or air intake valve of the system reservoir) is equipped with a waterproof membrane for air purification. The membrane is made of fiberglass, the percentage of air purification is 95% (standard – no less than 90%), which reduces the risk of violating the sterility of the injected solution.
The sterile infusion system is equipped with a nylon liquid microfilter with the minimum possible cell diameter of 15 microns, which allows for reliable purification of the solution from impurities without reducing the flow rate of the solution and prevents disruption of microcirculation in the capillaries of the lungs when microparticles of glass, rubber, etc. enter. (flow rate 1520 ml/10 min with standard 1000 ml/10 min).
The infusion system for infusion of solutions is equipped with Luer and Luer-Lock connections, adapted to injection needles, peripheral and central venous catheters.
the roller regulator smoothly changes the infusion rate: 20 drops = 1 ml.
transparent connecting tubes allow you to control the quality and condition of the injected solution.
Latex or latex-free injection unit allows for bolus injections.
injection needle 21G (0.8 x 40 mm) with atraumatic sharpening ensures painless venipuncture.
Specifications
quality: CE
sterilization: ethylene oxide
needle: 21G (0.8 x 40 mm)
packaging: individually in sterile polyethylene packaging
Prescribing
Infusion system for transfusion of solutions, intended for intravenous administration of infusion solutions.
Complete set of goods
System for infusion of infusion solutions – 1 pc.
Manufacturer
SFM Hospital Product, Germany
Conditions of storage | Store at a temperature of +5 to +25C and humidity up to 80%. |
---|---|
Manufacturer | SFM Hospital Product, Germany |
Brand | SFM Hospital Product |
Related products
Buy Transfusion system for infusion solutions, 1 pc with delivery to USA, UK, Europe and over 120 other countries.